Радиоуправляемые модели

1 Specification
Output : Continues 40 A, Burst 55 A up to 10 Secs.
Input Voltage : 5.6V --- 26V ( L ithium : 2 – 6s or NiMH/NiCd 5 -18 Cells)
BEC (Battery Elimination Circuit) Output : linear mode BEC 3A
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
Size : 28mm*55mm*12mm (width*length*height)
Weight : 33g


2 Features
2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.
2.3 Programmable Items :
Brake Settings : brake enabled / brake disabled, default is brake disabled
Battery Type : Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd) , default is Li-xx.
Low Voltage Protection Mode(Cutoff Mode) : power reducing / power cutoff, default is power reducing.
Low Voltage Protection Threshold(Cutoff Threshold) : low / medium / high, default is medium cutoff voltage.

1) For Li-xx battery , number of battery cells are judged automatically , low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.

2) For Ni-xx battery, low / medium / high cutoff voltages are 0/45%/60% of the startup voltage. (0% means the low voltage cutoff function is disabled).

Startup mode: normal / soft / super-soft, default is normal startup.

Timing: low / medium / high, default is medium timing.

2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection .